Avocent DSView 3, Installer/User Manual, Page: 163 / 384

Chapter 4: Managing Units 145
3. Click on the name of a power device.
4. Click Input Feeds in the side navigation bar. The Power Device Input Feeds window will open.
Customizing the Power Device Input Feeds window
The following fields may be displayed in the Power Device Input Feeds window. For detailed field
descriptions, see the product documentation. Use the
Customize link to add or remove fields in the
display. See Using the Customize link in windows on page 12.
• Input Feed Name
• Status - Unknown, on, off, cycling, pending off, pending on, pending cycle or no status
• Load
• Load Max - a trap will be sent if the Load value is greater than the Load Max value
• Load Min - a trap will be sent if the Load value is less than the Load Min value
To change power device input feed information:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in the
side navigation bar. The Power Devices Attached to Appliance window will open.
3. Click on the name of a power device.
4. Click Input Feeds in the side navigation bar. The Power Device Input Feeds window will open.
5. Click on an input feed name. The Power Device Input Feed Settings window will open. Some
fields are read-only. For fields that can be modified, enter or select new values.
6. Click Save and then click Close . The Power Device Sockets window will open.
7. Click Close . The Power Devices Attached to Appliance window will open.
8. Click Close . The Units View window will open.
Power device sockets
To display information about power device sockets or initiate a push/
pull operation:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in the
side navigation bar. The Power Devices Attached to Appliance window will open.
3. Click on the name of a power device.
4. Click Sockets in the side navigation bar. The Power Device Sockets window will open.
If you change the IP address of a managed appliance that is attached to a power device, the
appliance may need rebooting. In this case, a Reboot Required icon will be displayed in the top