Avocent DSView 3, Installer/User Manual

Page: 339 / 384

Appendices 321
baud, 8 bits, 1 stop bit, no parity and enabled hardware flow control. The DSR Remote
Operations application must be started within the authentication time-out specified in the
Terminal Applications menu of the DSR switch or the PPP (modem) link will be disconnected.
• Ensure that the PC containing the client interface has dial-up software and that the software is
configured properly. See the operating system documentation for more information.
• Install the DSR Remote Operations software.
Installing the DSR Remote Operations software
In this procedure, the DSR Remote Operations software plus its online help and the JRE (Java
Runtime Environment will be installed.
Minimum requirements for the DSR Remote Operations software
The following are the minimum requirements for installing the DSR Remote Operations software
as a DSView 3 software client:
• 1 GHz Pentium or equivalent processor
• 512 MB RAM
• XGA video with graphics accelerator
• Desktop size setting of at least 800 x 600
• Color palette of at least 256 colors
• One of the following operating systems:
• Windows 2000 Workstation or Server with Service Pack 2 or later
• Windows XP Home Edition or Professional
The DSR Remote Operations software is installed from the DSView 3 software CD.
To install the DSR Remote Operations software:
1. Log on to the host system as Administrator.
2. Insert the DSView 3 software CD. An autorun file will bring up a menu of installation options.
3. Click Install DSR Remote Operations .
-or-
If autorun is not enabled, type <drive:>\DSR Remote Operations\win32\setup.exe , where
<drive:> is the letter of your CD-ROM drive.
4. An installation preparation dialog box displays and the installation program will verify that the
client computer meets the minimum requirements for installing the DSR Remote
Operations Software.
5. The Introduction window will open. Click Next .
6. The License Agreement window will open.
• If you accept the terms, click I accept the terms of the License Agreement and then click
Next . Go to step 7.