Allworx PowerFlex P810, User Manual

Page: 48 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.2.2
Rate Limiters
The section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate Limiter ID
ranges from 1 to 16 and the rate is set in pps or kbps.
To configure ACL Rate Limiter via the web interface:
1. Navigate to Configuration > ACL > Rate Limiter .
2. Specify the rate ranging from 0 to 3276700.
3. Scroll to set the Unit to pps or kbps.
4. Click
Apply or click Reset to revert to previously saved values. 0.
Figure 29:
ACL Rate Limiter Configuration
Parameter Description
Rate Limiter ID The rate limiter ID for the settings.
Rate The values are: 0-3276700 in pps or 0, 100, 200, 300, ..., 1000000 in kbps.
Unit Specify the rate unit. The values are:
pps: packets per second.
kbps: Kbits per second.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 40