Allworx PowerFlex P810, User Manual

Page: 50 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
Ingress Port Select the ingress port for which this ACE applies.
All: The ACE applies to all port.
Port n:
The ACE applies to this port number, where n is the number of the switch
port.
Policy Filter Specify the policy number filter for this ACE.
Any: No policy filter is specified (policy filter status is "don't-care".)
Specific: T o filter a specific policy with this ACE, select this value. Two fields for
entering policy value and bitmask appear.
Frame Type Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
Ethernet type: Only Ethernet Type frames can match this ACE. The IEEE 802.3
describes the value of Length/Type Field specifications to be greater than or equal
to 1536 decimal (equal to 0600 hexadecimal).
ARP: Only ARP frames can match this ACE. Notice the ARP frames won't match
the ACE with ethernet type.
IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match
the ACE with ethernet type.
IPv6: Only IPv6 frames can match this ACE. Notice the IPv6 frames won't match
the ACE with ehternet type.
Action Specify the action to take with a frame that hits this ACE.
Permit: The frame that hits this ACE is permitted for the ACE operation.
Deny:
The frame that hits this ACE is dropped.
Rate Limiter Indicates the rate limiter number of the ACE. The range is 1 to 16. When set to
Disabled, the rate limiter operation is disabled.
Port Redirect Frames that hit the ACE are redirected to the port number specified here. The
range is the same as the switch port number range. Disabled indicates that the
port redirect operation is disabled.
Mirror Specify the mirror operation of this port. Frames matching the ACE are mirrored to
the destination mirror port. The values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging Indicates the logging operation of the ACE. Possible values are:
Enabled: Frames matching the ACE are stored in the System Log.
Disabled: Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate are limited.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 42