Allworx PowerFlex P810, User Manual

Page: 166 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.22
SMTP Configuration
The SMTP configuration enables configuring the switch to generate an email when a trap event occurs.
Up to 6 email recipients can be set,
To configure the SMTP settings via the web interface:
1. Navigate to Configuration > SMTP Configuration.
2. Select the Severity Level and set the parameters.
3. Click
Apply
or click
Reset
to cancel changes and revert to previously saved values. 0.
Figure 110:
SMTP Configuration
Parameter Description
Mail Server Specify the IP Address of the Email server.
Username Specify the username on the mail server.
Password Specify the password on the mail server.
Sender To set the mail sender name.
Return-Path To set the mail return-path as sender’s mail address.
Email Address 1-6 Email addresses to send the alarm message to.
.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 158