Allworx PowerFlex P810, User Manual

Page: 107 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
than the power supply can deliver. In this case the port with the lowest priority
will be turn off starting from the port with the highest port number.
Maximum Power It indicates the maximum power in watts that can be delivered to a remote
device.
NOTE : Tto set the Port support IEEE802.3at, then set the Maximum allowed
value to 30W.
4.10.2
Status
This page enables the user to inspect the current status for all PoE ports. The section displays all ports’
PoE Status.
To display PoE Status in the web interface:
1. Navigate to Configuration > PoE > Status .
2. Click Auto-refresh to refresh the page automatically at periodic intervals.
3. Clicking Refresh manually refreshes the page. 0.
Figure 67: Power over Ethernet Status
Parameter Description
Local Port This is the logical port number for this row.
PD Class The PD class that the device attached port belongs to. The classification current
describes the amount of power the PD will require during normal operation.
Power Requested The Power Requested displays the requested amount of power the PD wants reserved.
Power Allocated The Power Allocated displays the amount of power the switch has allocated for the PD.
Power Used The Power Used displays the power the PD is currently using.
Current Used The Current Used displays the current the PD is currently using.
Priority The Priority displays the port's priority configured by the user (Allworx is typically 3
watts).
Port Status The Port Status displays the port's status.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 99