Allworx PowerFlex P810, User Manual

Page: 150 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
• IPv6: The QCE will match only IPV6 frames
SMAC Displays the OUI field of Source MAC address, i.e. first three octets (byte) of MAC
address.
DMAC Specify the type of Destination MAC addresses for incoming frame. Possible values
are:
• Any: Allows all types of Destination MAC addresses.
• Unicast: Only allows Unicast MAC addresses.
• Multicast: Only allows Multicast MAC addresses.
• Broadcast: Only allows Broadcast MAC addresses.
The default value is 'Any'
VID Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the range 1-
4095 or 'Any'.
Conflict (Not present
in Web UI)
Displays QCE status. It may happen that resources required to add a QCE may not
available, in that case it shows conflict status as 'Yes', otherwise it is always
'No'.Please note that conflict can be resolved by releasing the resource required by the
QCE and pressing 'Refresh' button.
PCP and DEI
Action Indicates the action that is taken on ingress frame if parameters configured are
matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
• Class: Classified QoS Class; if a frame matches the QCE it goes in the queue.
• DPL: Drop Precedence Level; if a frame matches the QCE then DP level will be set
to value displayed in the DPL column.
• DSCP: If a frame matches the QCE, then the DSCP classification includes the value
displayed in the DSCP column.
Modification Buttons Modify each QCE (QoS Control Entry) in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the QCE listings
Port Members Check the checkbox button to make any port a member of the QCL entry. By default all
ports will be checked.
Key Parameters Key configurations are described as below:
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 142