Allworx PowerFlex P810, User Manual

Page: 123 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
Delete To delete a MAC-based VLAN entry, check this box and click apply. The entry
will be deleted on the selected switch in the stack.
MAC Address Indicates the MAC address.
VLAN ID Indicates the VLAN ID.
Port Members A row of check boxes for each port is displayed for each MAC-based VLAN
entry. To include a port in a MAC-based VLAN, check the box. To remove or
exclude the port from the MAC-based VLAN, make sure the box is unchecked.
By default, no ports are members, and all boxes are unchecked.
Add new entry Click to add a new MAC-based VLAN entry. An empty row is added to the table,
and the MAC-based VLAN entry can be configured as needed. Any unicast
MAC address can be configured for the MAC-based VLAN entry. Do not use
broadcast or multicast MAC addresses. Legal values for a VLAN ID are 1
through 4095.
The MAC-based VLAN entry is enabled on the selected stack switch unit when
clicking
Apply
. A MAC-based VLAN without any port members on any stack
unit will be deleted when clicking Apply .
4.11.6.2 Status
This section displays MAC-based VLAN entries configured by various MAC-based VLAN users.
Currently we support following VLAN User types:
NAS: NAS provides port-based authentication, which involves communications between a Supplicant,
Authenticator, and an Authentication Server.
To display MAC-based VLANs configured in the web interface:
1. Navigate to Configuration > VLAN > MAC-based VLAN > Status .
2. Specify the view: Static NAS Combined. 0.
Figure 80: MAC-based VLAN Membership Status for User Static
Parameter Description
MAC Address Indicates the MAC address.
VLAN ID Indicates the VLAN ID.
Port Members Port members of the MAC-based VLAN entry.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 115