PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.20
Mirroring
Users can mirror traffic from any source port to a target port for real-time analysis, and then attach a
traffic analyzer or RMON probe to the target port and study the traffic crossing the source port in a
completely unobtrusive manner.
For example, assuming that Port A and Port B are Monitoring Port and Monitored Port respectively, the
traffic received by Port B is copied to Port A for monitoring.
To configure the Mirroring via the web interface:
1. Navigate to
Configuration
>
Mirroring
.
2. Set the Monitoring and Monitored ports and the modes – RX only, TX only or enabled (both RX and TX).
By default, the ports disable mirroring.
3. Click
Save
to save the setting or click Reset to cancel changes and revert to previously saved values.
0.
Figure 108:
Mirror Configuration
Parameter
Description
Port to mirror to
Port to mirror also known as the mirror port. Frames from ports that have either
source (rx) or destination (tx) mirroring enabled are mirrored on this port.
Disabled disables mirroring.
Mirror Port Configuration
The following table is used for Rx and Tx enabling.
Port
Indicates the port number.
Mode
Select mirror mode.
Rx only: Frames received on this port are mirrored on the mirror port. Frames
transmitted are not mirrored.
Toll Free 1-866-
ALLWORX • 585
-421-
3850 •
www.allworx.com
Revised: October 30, 2013
Page
155
Summary of Contents for PowerFlex P810
