Allworx PowerFlex P810, User Manual

Page: 66 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.5.5
MSTI Ports
This section enables the user to inspect and change the current STP MSTI port configurations.
An MSTI port is a virtual port, which is instantiated separately for each active CIST (physical) port for
each MSTI instance configured on and applicable to the port. Select the MSTI instance before
displaying actual MSTI port configuration options. It contains MSTI port settings for physical and
aggregated ports.
To configure the Spanning Tree MSTI Port Configuration parameters via the web interface:
1. Navigate to Configuration > Spanning Tree > MSTI Ports .
2. Use the drop-down menu to select the MST1 or other MSTI port.
3. Click
Get
to set the parameters of the MSTI ports.
4. Use the drop-down menus to set all parameters of the MSTI Port configuration.
5. Click Apply or click Reset to cancel the changes and revert to previously saved values. 0.
Figure 40: MSTI Port Configuration
Parameter Description
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 58