Allworx PowerFlex P810, User Manual

Page: 113 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
NOTE: Make sure that the link used for managing the switch is added to the
Static MAC Table before changing to secure learning mode, otherwise the
management link is lost and can only be restored by using another non-
secure port or by connecting to the switch via the serial interface
Static MAC Table Configuration
The static MAC table can contain upto 64 entries. The maximum of 64 entries is for the whole stack, and not
per switch.
The MAC table is sorted first by VLAN ID and then by MAC address.
Delete Check to delete the entry. It will be deleted during the next apply.
VLAN ID The VLAN ID of the entry.
MAC Address The MAC address of the entry.
Port Members Checkmarks indicate which ports are members of the entry. Check or uncheck
as needed to modify the entry.
Adding a New Static Entry Click to add a new entry to the static MAC table. Specify the VLAN ID, MAC
address, and port members for the new entry. Click Apply.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 105