Allworx PowerFlex P810, User Manual

Page: 85 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.8
MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast television
application, a PC or a television with a set-top box can receive the multicast stream. Multiple set-top
boxes or PCs can be connected to one subscriber port, which is a switch port configured as an MVR
receiver port.
When a subscriber selects a channel, the set-top box or the PC sends an IGMP join message to Switch
A requesting to join the appropriate multicast. MVR source parts are uplink ports that send and receive
multicast data to and from the multicast VLAN.
4.8.1
Configuration
The section describes the MVR basic configuration.
To configure MVR via the web interface:
1. Navigate to Configuration > MVR > Configuration .
2. Use the drop-down menu to enable or disable MVR. Set the VLAN ID and port details.
3. Click
Apply or click Reset to cancel changes and revert to previously saved values. 0.
Figure 56: MVR Configuration
Parameter
Description
MVR Mode Enable/Disable the MVR globally.
VLAN ID Specify the Multicast VLAN ID.
Mode Enable MVR on the port.
Type Specify the MVR port type on the port.
Immediate Leave IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 77