Allworx PowerFlex P810, User Manual

Page: 149 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.15.10
QoS Control List Configuration
This section shows the QoS Control List (QCL), which is made up of the QCEs. Each row describes a
defined QCE. The maximum number of QCEs is 256 on each switch . Click on the lowest plus sign to
add a new QCE to the list.
To configure the QoS Control List parameters via the web interface:
1. Navigate to Configuration > QoS > QoS Control List .
2. Click the sign to add a new QoS Control List
3. Set the parameters for the QCE and apply it to a port by checking the box (es) for the ports(s).
4. Click
Apply or click Reset to cancel changes and revert to previously saved values. 0.
Figure 98: QoS Control List Configuration
Parameter Description
QCE# Indicates the index of QCE.
Port Indicates the list of ports configured with the QCE.
Frame Type Indicates the type of frame to look for incoming frames. Possible frame types are:
• Any: The QCE will match all frame types.
• Ethernet: Only allows Ethernet frames (with Ether Type 0x600-0xFFFF).
• LLC: Only allows (LLC) frames.
• SNAP: Only allows (SNAP) frames
• IPv4: The QCE will match only IPV4 frames.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 141