PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
6.5.3
VeriPHY
This section
is used for running the VeriPHY Cable Diagnostics. This will take approximately 5
seconds. If all ports are selected, this can take approximately 15 seconds. When completed, the page
refreshes automatically, and the cable diagnostics results display in the cable status table. Note that
VeriPHY is only accurate for cables of length 7 -140 meters.10 and 100 Mbps ports will be linked down
while running VeriPHY. Therefore, running VeriPHY on a 10 or 100 Mbps management port will cause
the switch to stop responding until VeriPHY is complete.
To run a VeriPHY Cable Diagnostics via the web interface:
1. Navigate to
Maintenance
>
Diagnostics
>
VeriPHY.
2. Specify the Port to generate cable statistics. Select
All
to run the diagnostics for all ports.
3. Click
Start
.
0.
Figure 151:
VeriPHY
Parameter
Description
Port
The port for requiring VeriPHY Cable Diagnostics.
Cable Status
Port: Port number.
Pair: The status of the cable pair.
Length: The length (in meters) of the cable pair
Toll Free 1-866-
ALLWORX • 585
-421-
3850 •
www.allworx.com
Revised: October 30, 2013
Page 212
Summary of Contents for PowerFlex P810
