Allworx PowerFlex P810, User Manual

Page: 22 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
DHCP Client Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings will be used. The DHCP
client will announce the configured System Name as hostname to provide DNS
lookup.
IP Address Provide the IP address for the switch in the dotted decimal notation.
IP Mask Provide the IP mask for the switch in the dotted decimal notation.
IP Gateway Provide the IP address of the gateway in the dotted decimal notation.
VLAN ID Provide the management VLAN ID. The range is 1 to 4095.
DNS Server Provide the IP address of the DNS Server in the dotted decimal notation.
DNS Proxy When DNS proxy is enabled, the switch will relay DNS requests to the current
configured DNS server, and reply as a DNS resolver to the client device on the
network.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 14