Allworx PowerFlex P810, User Manual

Page: 33 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
3.8
Views
Use the function to configure SNMPv3 view. Max Group Number: 28.
To configure SNMP Views Configuration via the web interface:
1. Navigate to System > SNMP > Views .
2. Click Add new view and specify the SNMP View parameters.
3. Click Apply . 0.
Figure 18: SNMP Views Configuration
Parameter Description
Delete Check to delete the entry. It will be deleted during the next save.
View Name A string identifying the view name. The string length is 1 to 32, and the content is
ASCII characters from 33 to 126.
View Type Indicates the view type that this entry should belong to. Possible view types are:
included: An optional flag to indicate that this view subtree should be included.
excluded: An optional flag to indicate that this view subtree should be excluded.
In general, if a view entry's view type is 'excluded', there should be another view
entry existing with view type as 'included' and it's OID subtree should overstep the
'excluded' view entry
OID Subtree The OID defining the root of the subtree to add to the named view. The OID
length is 1 to 128. The string content is digital number or asterisk(*).
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 25