Allworx PowerFlex P810, User Manual

Page: 15 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
3.2
Time
This page enables configuring the system time manually or automatically using NTP server(s).
3.2.1
Manual
Manual setting is simple, just enter “Year”, “Month”, “Day”, “Hour”, “Minute” and “Second” within the
valid value range indicated in each item.
To configure system time manually from the web interface:
1. Navigate to System > Time > Manual .
2. Specify the parameters in each field.
3. Click
Apply
. 0.
Figure 4: Manual Time Configuration
Parameter Description
Clock Source Select “Use local Settings” or “Use NTP Server” for the clock source.
Local Time Display the current time of the system.
Time Zone Offset Provide the timezone offset relative to UTC/GMT. The offset is given in minutes east
of GMT. The valid range is from -720 to 720 minutes.
Daylight Saving Daylight saving is adopted in some countries. If set, it adjusts the time lag or advance
in unit of hours, according to the starting date and the ending date. For example, if
setting the day light saving to be 1 hour, when the time passes over the starting time,
the system time increases by one hour after one minute at the time since it passed
over and when the time passes over the ending time, the system time decreases by
one hour after one minute at the time since it passed over.
The valid configurable day light saving time is –
5 ~ +5 step one hour. A zero for this
parameter indicates no adjustment to the current time, equivalent to in-act daylight
saving. Users do not need to set the starting/ending date as well. If setting daylight
saving to be non-zero, set the starting/ending date as well; otherwise, the daylight
saving function is not active.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 7