Allworx PowerFlex P810, User Manual

Page: 72 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.6.2
VLAN Configuration
This section describes the VLAN configuration settings integrated with IGMP Snooping function. For
each setting, the page displays up to 99 entries from the VLAN table, default being 20, selected through
the "entries per page" input field. When first visited, the web page displays the first 20 entries from the
beginning of the VLAN Table in ascending order of the VLAN IDs. . The "Start from VLAN" field enables
the user to select the starting point in the VLAN Table.
To configure the IGMP Snooping VLAN Configuration via the web interface:
1. Navigate to Configuration > IGMP Snooping > VLAN Configuration .
2. Check/uncheck the Snooping Enabled checkbox to enable or disable Snooping on that VLAN.
3. Click the
Refresh
to update the data or click << or >> to display previous entry or next entry.
4. Click
Apply
or click
Reset
to cancel changes and revert to previously saved values. 0.
Figure 45:
IGMP Snooping VLAN Configuration
Parameter Description
Snooping Enabled Enable the Global IGMP Snooping.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 64