Allworx PowerFlex P810, User Manual

Page: 155 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.16
sFlow Agent
Monitor and modify the sFlow Collector configuration for the switch here. The switch supports up to 1
Collector. This page enables configuring sFlow collector IP type, sFlow collector IP Address and Port
Number.
4.16.1
Collector
The "Current” field displays the currently configured sFlow Collector. The "Configured" field displays the
new Collector settings configured by the administrator.
To configure the sFlow Agent via the web interface:
1. Navigate to Configuration > sFlow Agent > Collector .
2. Set the parameters for the Collector.
3. Click
Apply
or click
Reset
to cancel changes and revert to previously saved values. 0.
Figure 101: sFlow Collector Configuration UI shows sFlow Receiver ID
Parameter Description
Collector Id: UI
displays Receiver ID
The "Collector ID" input fields enable the user to select the Collector ID. Indicates the
ID of this particular sFlow Collector. Currently one ID is supported as one collector is
supported.
ID Type A drop down list to select the type of IP of Collector is displayed. By default, it is IPv4.
IP Address The address of a reachable IP should be entered.
This IP is used to monitor the sFlow samples sent by sFlow Agent(the switch).
By default, the IP is set to 0.0.0.0
Port A port to listen to the sFlow Agent has to be configured for the Collector.
The accepted value is within the range of 1-
65535. A port number not used by other
protocols can to be configured.By default, the port number is 6343.
Time Out The duration during which the collector receives samples. Once it expires, the
sampler stops sending the samples. It is through the management the value is set
before it expires. The accepted value is within the range of 0-2147483647. By default
it is set to 0.
Datagram Size It is the maximum UDP datagram size to send out the sFlow samples to the receiver.
The range is 200 - 1500 bytes. The default is 1400 bytes.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 147