Allworx PowerFlex P810, User Manual

Page: 47 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The values are 0 through 255. The default
value is 0.
Action Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
Rate Limiter ID Select which rate limiter to apply on this port. The values are Disabled or the
values 1 through 16. The default value is "Disabled".
Port Redirect Select which port frames are redirected on. The values are Disabled or a specific
port number. The default value is "Disabled".
Mirror Specify the mirror operation of this port. The values are:
Enabled: Frames received on the port are mirrored.
Disabled:
Frames received on the port are not mirrored.
The default value is "Disabled".
Logging Specify the logging operation of this port. The values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and
logging rate are limited.
Shutdown Specify the port shut down operation of this port. The values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
State Specify the port state of this port. The values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL
user module.
Disabled: To close ports by changing the volatile port configuration of the ACL
user module.
The default value is
"Enabled".
Counter Counts the number of frames that match this ACE.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 39