Allworx PowerFlex P810, User Manual

Page: 38 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
Port This is the port number.
Link The current link state is displayed. Green indicates the link is up at 1 Gbps
full-duplex, amber indicates the link is up at 100 Mbps full-duplex.Red
indicates that the link is down.
Current Link Speed Displays the current link speed of the port.
Configured Link Speed Select any available link speed for the given switch port.
Auto: Automatically negotiates the highest speed that is compatible with the
link partner.
Disabled: Disables the switch port operation..
Flow Control When Auto Speed is selected on a port, this section indicates the flow
control capability that is advertised to the link partner. When a fixed-speed
setting is selected, that is what is used. The Current Rx column indicates
whether pause frames on the port are obeyed, and the Current Tx column
indicates whether pause frames on the port are transmitted. The Rx and Tx
settings are determined by the result of the last Auto-Negotiation.
Check the configured column to use flow control. This setting is related to
the setting for Configured Link Speed.
Maximum Frame Size Enter the maximum frame size for the switch port, including FCS.
Excessive Collision Mode Configure port transmit collision behavior.
Discard: Discard frame after 16 collisions (default).
Restart: Restart backoff algorithm after 16 collisions.
Power Control The Usage column displays the current percentage of the power
consumption per port. The Configured column enables changing the power
savings mode parameters per port.
Disabled: All power savings mechanisms disabled.
ActiPHY:
Link down power savings enabled.
PerfectReach: Link up power savings enabled.
Enabled: Both link up and link down power savings enabled
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 30