Allworx PowerFlex P810, User Manual

Page: 167 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
4.23 UPnP
Universal Plug and Play (UPnP) enables devices to connect seamlessly and to simplify the
implementation of networks in the home (data sharing, communications, and entertainment) and in
corporate environments for simplified installation of networking components.
To configure the UPnP settings via the web interface:
1. Navigate to Configuration > UPnP
2. Specify the mode, TTL and Advertising Duration.
3. Click
Apply
or click
Reset
to cancel changes and revert to previously saved values. 0.
Figure 111: UPnP Configuration
Parameter Description
Mode Indicates the UPnP operation mode. Possible modes are:
Enabled: Enable UPnP operation mode.
Disabled: Disable UPnP operation mode.
When enabled, two ACEs are automatically added to trap UPnP related packets to
CPU. The ACEs are automatically removed when the mode is Disabled.
TTL The TTL value is used by UPnP to send SSDP advertisement messages. Valid
values are in the range 1 to 255.
Advertising Duration The duration tells the control point (s) how often it should receive an SSDP
advertisement message from the switch.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 159