Allworx PowerFlex P810, User Manual

Page: 128 / 236

PowerFlex
8/24/48 Port GbE PoE Managed Switch User’s Guide
Parameter Description
Mode Indicates the Voice VLAN mode operation. We must disable MSTP feature before
we enable Voice VLAN. It can avoid the conflict of ingress filtering. Possible
modes are:
Enabled: Enable Voice VLAN mode operation.
Disabled: Disable Voice VLAN mode operation.
VLAN ID Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system. The
range is 1 to 4095.
Aging Time Indicates the Voice VLAN secure learning aging time. The range is 10 to
10000000 seconds. It is used when security mode or auto detect mode is
enabled. In other cases, it will be based on hardware aging time. The actual aging
time will be in the [age_time; 2 * age_time] interval.
Traffic Class Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will belong to
this class.
Port Mode Indicates the Voice VLAN port mode.
When the port mode is not equal disabled, we must disable MSTP feature before
we enable Voice VLAN. It can avoid the conflict of ingress filtering.
Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode. It detects whether there is a VoIP phone
attached to the specific port and configures the Voice VLAN members
automatically.
Forced: Force join to Voice VLAN.
Port Security Indicates the Voice VLAN port security mode. When the function is enabled, all
non-telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds.
Possible port modes are:
Enabled: Enable Voice VLAN security mode operation.
Disabled: Disable Voice VLAN security mode operation.
Port Discovery Protocol Indicates the Voice VLAN port discovery protocol. It will only work when auto
detect mode is enabled. Enable the LLDP feature before configuring discovery
protocol to "LLDP" or "Both". Changing the discovery protocol to "OUI" or "LLDP"
will restart auto detect process. Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP.
Both: Both OUI and LLDP
Note: If using is a phone model 9224 handset, do the following steps:
Connect the phone to the switch. The phone fails to boot up.
Press the button below the
Config softkey and navigate to Network
Settings. Select the option by pressing the

key.
Toll Free 1-866- ALLWORX • 585 -421- 3850 • www.allworx.com
Revised: October 30, 2013
Page 120