ACTi A713 Firmware Manual Download Page 17

Page: 17 / 115

Streaming Authentication Setting

This setting provides security against unauthorized users from getting streaming

via Real Time Streaming Protocol (RTSP). If the setting is enabled, users will be

requested to enter user name and password before viewing the live streams.

There are three security modes available: Disable, Basic and Digest. Refer to

the descriptions below for more details.

⚫

Disable

If disable mode is selected, there will be no security provided to against

unauthorized access. Users will not be asked to input user name and

password for authentication.

⚫

Basic

This mode can only provide basic protection for the live streams.

There will still be risks for the password being intercepted.

⚫

Digest

Digest mode is a safer option for protection. The password is sent in an

encrypted format to prevent it from being stolen.

NOTE:

Users

MUST

click on <Save> to apply the setting.

Enable Account Lockout Function

The Account Lockout Function is to lock out an account when someone tries to

log on unsuccessfully several times in a row. To protect user

’s account,

“Account Lockout Function’’ is activated when multiple login failures occur.

Check the box <Enable Account Lockout Function> and enter the number of

threshold and duration.

⚫

Threshold

Threshold is a maximum number of login attempts, ranging from 5-20

times. The default value is 5 (attempts).

⚫

Duration

Duration is the length of time that the account remains locked once the

account lockout function is triggered, ranging from 1-60 minute(s). The

default value is 10 (mins).

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands