ACTi A713 Firmware Manual Download Page 85

Page: 85 / 115

⚫

P-Iris Priority Mode (Zoom Lens and Motorized Lens Only)

P-iris priority mode is only available for Zoom Lens and Motorized Lens

models. In addition, applied with different lens, the related setting

options also vary. Refer to the following for further details.

➢

Zoom Lens

Select <Auto Detect>, the camera will automatically detect the best

iris size for the environment. Alternatively, users can manually adjust

the iris size by selecting <Manual>. Click

and

adjust the iris size. The minimum shutter speed can be set from 1/30

to 1 sec. (NTSC) or 1/25 to 1/1.5 sec. (PAL).

➢

Motorized Lens

Click on

, and the camera will automatically detect the best iris

size for the environment. If necessary, users can select

and

manually to adjust the iris size. Alternatively, click on

to reset the iris size, and the iris size will be set to the largest. Then,

users can manually adjust the iris size by selecting

and

. The minimum shutter speed can be set from 1/500 to 1 sec.

(NTSC) or 1/425 to 1/1.5 sec. (PAL).

⚫

Iris Priority Mode (Zoom Lens Only)

In this mode, it is the iris that has premier priority in control of the

exposure. The range of the iris size is from 0 to 9, or select <Full open>

to fully open the iris. The minimum shutter speed can be set from 1/30 to

1 sec. (NTSC) or 1/25 to 1/1.5 sec. (PAL).

⚫

Auto Shutter Mode (Motorized Lens Excluded)

In this mode, the camera will automatically adjust the shutter speed and

the iris size according to the light intensity. It is also effective if a fixed iris

lens is being used. The minimum shutter speed range is configurable

from 1/500 to 1 sec. (NTSC) or 1/425 to 1/1.5 sec. (PAL).

⚫

Shutter Priority Mode (Fixed Lens and Motorized Lens Excluded)

In this mode, it is the shutter speed that takes the main control of the

exposure. The range is configurable from 1/500 to 1/30 sec. (NTSC) or

1/425 or 1/25 sec. (PAL).

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands