ACTi A713 Firmware Manual Download Page 61

Page: 61 / 115

2.2.9

Storage Management

The Storage Management setting can be found under this path:

System>

Storage Management

Click on <Storage Management>, there will be a drop-down menu with tabs

including <SD Card> and <Network Share>.

2.2.9.1

SD Card

The SD Card setting can be found under this path:

System> Storage

Management> SD Card

Users can implement local recording to the microSD/SDHC/SDXC card up to

128GB. This page shows the capacity information of the microSD/SD card and

a recording list with all the recording files saved on the memory card. Users can

also format the microSD/SD card and implement automatic recording cleanup

through the setting page.

To implement microSD/SD card recording, please go to the <Recording> page

(refer to section

Recording

) for activation.

NOTE:

Please format the microSD/SDHC/SDXC card when using it for

the first time. Formatting will also be required when a memory card is

being used on one camera and later transferred to another camera with

different software platform.

NOTE:

It is not recommended to record with the microSD/SD card for

24/7 continuously, as it may not be able to support long term continuous

data read/write. Please contact the manufacturer of the microSD/SD

card for information regarding the reliability and the life expectancy.

Device Information

After the microSD/SD card is inserted into the camera, the card information

such as memory capacity and status will be shown at <Device Information>.

Recording Source

Select a video stream to set as the recording source. The default format of the

video stream is <Stream 1>. Select a preferred stream from the drop-down list

and click on <Save> to apply the setting.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands