ACTi A713 Firmware Manual Download Page 94

Page: 94 / 115

2.4.5

Noise Reduction

The Noise Reduction setting can be found under this path:

Camera> Noise

Reduction

The camera provides multiple <Noise Reduction> options for delivering

optimized image quality especially in extra low-light conditions.

3DNR

3DNR (3D Noise Reduction) function delivers optimized image quality

especially in extra low-light conditions.

Different levels of 3DNR are provided, including 3DNR Low, 3DNR Mid and

3DNR High. Higher level of 3DNR generates relatively enhanced noise

reduction.

2DNR

2DNR (2D Noise Reduction) function delivers clear images without motion blurs

in extra low-light conditions.

Select <on> to turn on 2DNR function; otherwise, select <off> to turn off 2DNR

function.

ColorNR

In a dark or insufficient light environment and the camera is under color mode,

ColorNR (Color Noise Reduction) can eliminate color noise.

Three levels of ColorNR, including Color Low, Color Mid and Color High, are

provided. The higher level of ColorNR generates relatively enhanced noise

reduction.

2.4.6

WDR Function

The WDR Function setting can be found under this path:

Camera> WDR

Function

The Wide Dynamic Range (WDR) function is for solving high contrast or

changing light issues to enhance video display quality. Different level options for

WDR include Low, Mid and Hi. Higher level of WDR represents wider dynamic

range, so that the camera can catch a greater scale of brightness.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands