ACTi A713 Firmware Manual Download Page 78

Page: 78 / 115

2.3.3

Video Text Overlay

Users can select the items to display data including date & time / text string /

subtitle / image on the live video pane.

Overlay Type

Users can select at most three items out of four options including date & time /

text string / subtitle / image to display on the live video pane.

⚫

Include Date & Time

Check the box to enable date & time display on the Live Video Pane and

a Video Text Overlay Window will show up. Move the mouse cursor to

the center of the window then click and drag the window to preferred

display position. Users can choose to display date, time, or date & time

from the drop-down menu, and decide the string align position (left /

right).

⚫

Include Text String

Check the box to enable text string display on the Live Video Pane and a

Video Text Overlay Window will show up. Move the mouse cursor to the

center of the window then click and drag the window to preferred display

position. Type the text to display in the entry field and decide the string

align position (left / right). The maximum length of the text string is 15

alphanumeric characters.

⚫

Include Subtitle

Check the box to enable subtitle display on the Live Video Pane and a

Video Text Overlay Window will show up. Move the mouse cursor to the

center of the window then click and drag the window to preferred display

position. Type the text to display in the entry field and decide the string

align position (left / right). Users can set at most 5 subtitles, and the

maximum length of each subtitle is 16 alphanumeric characters.

⚫

Include Image

Check the box to enable image display on the Live Video Pane and a

Video Text Overlay Window will show up. Move the mouse cursor to the

center of the window, click and drag the window to preferred display

position, and then decide the string align position (left / right).

Click on <Set> to confirm the setting.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands