ACTi A713 Firmware Manual Download Page 77

Page: 77 / 115

The default setting for Stream 1 & Stream 2 is

“stitiched_view” Mode. If

users want to view the unstitched images of each fixed Lens, please

select the viewing mode of

Stream 1

“view_1” or “view_2” Mode

firstly. Then, select the desired unstitched viewing mode for Stream 2.

⚫

Fisheye Model (8)

The default setting for Stream 1 is

“overview” Mode.

NOTE:

This item is only available when Fisheye Dewarping

Type is set as <Front End Camera Dewarping>. Refer to the

section

Fisheye Setting (Fisheye IP Camera Only)

under

Camera

for further details.

Click on <Save> to confirm the setting or click on <Reset> to return to the

previous settings.

2.3.2

Video Rotation

Rotate Function

Users can change video display type if necessary. Selectable video rotate types

include Mirror video and 90/180/270 degree clockwise rotate. Refer to the

following descriptions for the different video rotate type.

⚫

Mirror

Select <yes> from the drop-down menu, and the image will be rotated

horizontally.

⚫

Rotate Type

Users can choose 0, 90, 180, or 270 degree from the drop-down menu

to rotate the image.

Click on <Save> to confirm the setting.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands