ACTi A713 Firmware Manual Download Page 63

Page: 63 / 115

⚫

Download

To open / download a video clip / image, select the file first, and then

click on <download> below the Recording list field. The selected file

window will pop up. Click on the AVI / JPEG file to directly open the file

or download it to a specified location.

2.2.9.2

Network Share (NAS)

The Network Share setting can be found under this path:

System> Storage

Management> Network Share

Users can store the recording videos to a network share folder, or NAS

(Network-Attached Storage). A NAS device is used for data storage and data

sharing via network. This page displays the capacity information of the network

device and a recording list with all the recording files saved on the network

device. Users can also format the NAS and implement automatic recording

cleanup through the setting page.

Device Information

When a NAS is successfully installed, the device information such as the

memory capacity and status will be shown at <Device Information>.

Storage Settings

The administrator can set the camera to send the alarm messages to a specific

NAS site when an alarm is triggered. Enter the network device details, which

include host (the IP of the NAS), share (the folder name of the NAS), user name,

and password, in the fields.

Click on <Save> when finished.

Storage Tools

Click on <Format> to format the NAS.

Recording Source

Select a video stream to set as the recording source. The default format of the

video stream is <Stream 1>. Select a preferred stream from the drop-down list

and click on <Save> to apply the setting.

Recording Filename Format

Select a format to set as the recording filename format. The default recording

filename format is <Start time only>. Select a preferred format from the

drop-down list and click on <Save> to apply the setting.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

ACTi A713, Firmware Manual, Page: 63 / 115

Search results

Summary of Contents for A713

Reviews: