ACTi A713 Firmware Manual Download Page 28

Page: 28 / 115

2.2.3.3

VLAN

The VLAN setting can be found under this path:

System> Network> VLAN

Check the box <Enable VLAN> to activate the VLAN function. Enter the VLAN

ID. The allowed range of VLAN ID is from 1 to 4095. The default value is 20.

CoS

CoS stands for Class of Service. The higher the value of CoS is, the better

transmission performance will be. The value also determines the transmission

priority among the following three classes: Live Video, Live Audio and

Management.

⚫

Live Video

The value range is from 0 to 7.

⚫

Live Audio

The value range is from 0 to 7.

⚫

Management

The value range is from 0 to 7.

2.2.3.4

SNMP

The SNMP (Simple Network Management Protocol) setting can be found under

this path:

System> Network> SNMP

With Simple Network Management Protocol (SNMP) support, the camera can

be monitored and managed remotely by the network management system.

SNMP v1 / v2

⚫

Enable SNMP v1 / v2

Select the version of SNMP to use by checking the box.

⚫

Read Community

Specify the community name that has read-only access to all supported

SNMP objects. The default

value is “public”.

⚫

Write Community

Specify the community name that has read / write access to all

supported SNMP objects (except read-only objects). The default value is
“private”.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands