ACTi A713 Firmware Manual Download Page 27

Page: 27 / 115

2.2.3.2

QoS

The QoS (Quality of Service) setting can be found under this path:

System>

Network> QoS

QoS allows providing differentiated service levels for different types of traffic

packets, which guarantees delivery of priority services especially when network

congestion occurs. Adapting the Differentiated Services (DiffServ) model, traffic

flows are classified and marked with DSCP (DiffServ Codepoint) values, and

thus receive the corresponding forwarding treatment from DiffServ capable

routers.

DSCP Settings

The DSCP value range is from 0 to 63. The default DSCP value is 0, which

means DSCP is disabled. The camera uses the following QoS Classes:

Management, Video and Audio.

⚫

Management DSCP

The class consists of HTTP traffic: Web browsing.

⚫

Stream 1~4 DSCP

Users can set the Audio/Video DSCP of each stream.

➢

Video DSCP

The class consists of applications such as MJPEG over HTTP,

RTP/RTSP and RTSP/HTTP.

➢

Audio DSCP

This setting is only available for the cameras that support audio.

NOTE:

To enable this function, please make sure the switches / routers

in the network support QoS.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands