ACTi A713 Firmware Manual Download Page 67

Page: 67 / 115

Time Mode

⚫

Day

The camera profile will be loaded when IR cut filter is on.

⚫

Night

The camera profile will be loaded when IR cut filter is off.

⚫

Time

This indicates the start time and the time duration for the schedule.

NOTE:

Users

MUST

select <By schedule> under each feature setting

page to enable the schedule function.

2.2.12 File Location (Snapshots and Web Recording)

The File Location setting can be found under this path:

System> File Location

Users can specify a storage location on the PC or in the hard drive for the

snapshots and the live video recordings. The default setting is: C:\. Once the

setting is confirmed, click on <Save>, and all the snapshots and the web

recordings will be saved in the designate location.

NOTE:

Make sure the selected file path contains valid characters such

as letters and numbers.

NOTE:

With Windows 7 operating system or above, to implement the

Snapshot and Web Recording functions, users must run IE as

administrator. To run IE as administrator, right click on the IE browser

icon and select

“Run As Administrator” to launch IE.

2.2.13 View Information

The View Information function can be found under this path:

System> View

Information

Click on <View Information>, there will be a drop-down menu with tabs including

<Log File>, <User Information>, and <Parameters>.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

ACTi A713, Firmware Manual, Page: 67 / 115

Search results

Summary of Contents for A713

Reviews: