ACTi A713 Firmware Manual Download Page 4

Page: 4 / 115

Overview

The DNN Network IP Camera features newest Deep Neural Network

technology. With new hardware accelerated engine which benefits from SoC

Structure, it provides professional-level Video Analytics(VA) functions (e.g.,

object recognition, facial detection, facial recognition, license plate recognition).

Menu Tree

There are six main tabs including <Home>, <System>, <Streaming>, <Camera>,

<Pan Tilt> and <Logout> on the Home Page.

Home

Users can monitor the live video of the targeted area.

System Setting

The administrator can set host name, system time, root password, network

related settings, etc. Further details will be interpreted in chapter

System

Streaming Setting

The administrator can configure video format, video compression, video OCX

protocol, video frame rate and audio compression in this page.

Camera Setting

This setting page is only available for the administrator and user accounts that

have been granted the privilege of camera control. The administrator and users

can adjust various camera parameters including Exposure, White Balance,

Sharpness, 2D/3DNR, Digital Zoom, WDR, etc.

Pan Tilt Setting

This setting page is only available for the administrator and user accounts that

have been granted the privilege of camera control. The administrator and users

can set preset point and sequence line in this page. However, only the

administrator can access the <Pan/Tilt Control> setting to activate the pan/tilt

functions and select the RS-485 protocol.

NOTE:

Pan Tilt function is only available for camera models with

RS-485.

Logout

Click on the tab to logout the system. Click <Login> to re-login the camera with

another username and password.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

ACTi A713, Firmware Manual, Page: 4 / 115

Search results

Summary of Contents for A713

Reviews: