ACTi A713 Firmware Manual Download Page 14

Page: 14 / 115

Time format

Choose a time format (yyyy/mm/dd or dd/mm/yyyy) from the drop-down menu.

The format of the date and time displayed above the live video window will be

changed according to the selected format.

Sync with Computer Time

Select the item, and video date and time display will synchronize with the PC

’s.

NOTE:

Users

MUST

click on <Save> to confirm the setting. Otherwise,

the time will not be synced.

Manual

The administrator can set video date and time manually. Entry format should be

identical with the examples shown next to the enter fields.

Sync with NTP Server

Network Time Protocol (NTP) is an alternate way to synchronize the

camera’s

clock with a NTP server. Please specify the server that is wished to synchronize

in the entry field. Then select an update interval from the drop-down menu.

For further information about NTP, please see the web site:

www.ntp.org

NOTE:

The synchronization will be done every time the camera boots

up.

Click on <Save> to confirm the setting.

Summary of Contents for A713




















































































































Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands

ACTi A713, Firmware Manual

Search results

Summary of Contents for A713

Reviews:

Related manuals for A713

Brands by name

Popular brands