37
2.2.8.2
Motion Detection
The Motion Detection setting can be found under this path:
System> Events>
Motion Detection
.
Motion Detection function allows the camera to detect suspicious motion and
trigger alarms by comparing sampling pixels in the detection area of two
consecutive live images. When motion volume in the detection area reaches /
exceeds the determined sensitivity threshold value, the alarm will be triggered.
The function supports up to 4 sets of Motion Detection Settings. Settings can be
chosen from the Motion Detection drop-down menu.
Motion Detection
By default, Motion Detection function for each Motion Detection Setting is <Off>.
Select <On> to enable Motion Detection
.
Users can also activate the function
according to the schedule previously set in the <Schedule> setting page. Select
<By schedule> and click <Please select…> to choose the desired schedule
from the drop-down menu.
Motion Region Setup (Motion Region Paint)
The camera divides the detection area into 1200 (40x30) detection grids; users
can draw the motion detection region using the paintbrush.
Check the box <Enable brush> and select the brush size, 1x1, 3x3 or 5x5. Then,
left click and drag the mouse cursor to draw the preferred detection region. To
erase the drawn detection region, left click and drag the mouse cursor on the
colored grids.