168 Program features
Settings
Timer
Drive start and stop can be controlled with timer functions.
Settings
Diagnostics
Parameter
Additional information
Timed functions settings
Timed start/stop control
Timed EXT1/EXT2 selection
Timed constant speed 1 activation
Timed speed selection
Timed function status indicated through relay output RO 1
Timed function status indicated through relay output
RO 2…4. With option MREL-01 only.
Timed function status indicated through digital output DO
Timed PID1 parameter set 1/2 selection
Timed external PID2 activation
Timed Sequence programming activation
8435
/…/
8495
8436
/…/
8496
Sequence programming state change trigger with timed
function
Parameter
Additional information
Start/stop signal sources
Group
Timer for start and stop
Actual signal
Additional information
Start/stop control time count
Summary of Contents for ACS355 series
