ABB ACS355 series, User Manual

Page: 166 / 436

166 Program features
Use the control panel to configure the timer in four stages:
1. Enable the timer.
Configure how the timer is activated. The timer can be enabled from one of the
digital inputs or inverted digital inputs.
2. Set the time period.
Define the start and stop times and start and stop day when the timer operates.
These constitute a time period.
3. Create the timer.
Assign the selected time period to certain timer(s). Different time periods can be
collected in a timer and connected to parameters. The timer can act as the source
of start/stop and change direction commands, constant speed selection and relay
activation signals. Time periods can be in multiple timed functions, but a
parameter can only be connected to a single timer. It is possible to create up to
four timers.
4. Connect selected parameters to the timer.
A parameter can only be connected to one timer.
A timed function can be connected to multiple time periods.
Time period 1
3602 START TIME 1
3603 STOP TIME 1
3604 START DAY 1
3605 STOP DAY 1
Time period 4
3614 START TIME 4
3615 STOP TIME 4
3616 START DAY 4
3617 STOP DAY 4
Time period 3
3610 START TIME 3
3611 STOP TIME 3
3612 START DAY 3
3613 STOP DAY 3
Time period 2
3606 START TIME 2
3607 STOP TIME 2
3608 START DAY 2
3609 STOP DAY 2
Booster
3622 BOOSTER SEL
3623 BOOSTER TIME
Timed function 1
3626 TIMED FUNC 1 SRC
Timed function 2
3627 TIMED FUNC 2 SRC
Timed function 3
3628 TIMED FUNC 3 SRC
Timed function 4
3629 TIMED FUNC 4 SRC