Program features 129
Reference types and processing
The drive can accept a variety of references in addition to the conventional analog
input and control panel signals.
• The drive reference can be given with two digital inputs: One digital input
increases the speed, the other decreases it.
• The drive can form a reference out of two analog input signals by using
mathematical functions: addition, subtraction, multiplication and division.
• The drive can form a reference out of an analog input signal and a signal received
through a serial communication interface by using mathematical functions:
addition and multiplication.
• The drive reference can be given with frequency input.
• In external control location EXT1/2, the drive can form a reference out of an
analog input signal and a signal received through Sequence programming by
using a mathematical function: addition.
It is possible to scale the external reference so that the signal minimum and
maximum values correspond to a speed other than the minimum and maximum
speed limits.
Settings
Diagnostics
Parameter
Additional information
Group
External reference source, type and scaling
Group
Operating limits
Group
Speed reference acceleration/deceleration ramps
Group
Torque reference ramp times
Group
Reference supervision
Actual signal
Additional information
REF1/REF2 reference
Group
References in different stages of the reference
processing chain
Summary of Contents for ACS355 series
