1.1
Using This Manual
Set-up and Installation
Section 2 describes the set up of the DeltaSphere hardware and SceneVision software.
Background Information
Section 3 is an introduction to SceneVision software, including basic information about data
types and file formats.
Scanning
Section 4 is a guide to scanning with the DeltaSphere and SceneVision.
All users should read
this section before operating the DeltaSphere-3000.
DeltaSphere Color Option
Section 5 describes the DeltaSphere color option set up.
Section 6 is a guide to range and color capture with the DeltaSphere and SceneVision.
SceneVision Functions – Data Preparation, Annotation, Analysis, and Editing
Sections 7 and 8, on
Viewing Tools
and
Annotation and Analysis Tools
, are principally for those
involved with viewing and analysis of DeltaSphere data, though they may be of interest to all
users.
Sections 9 and 10, on
Range Alignment
and
Color Alignment
, are primarily for those involved in
data preparation. They describe the alignment needed to combine multiple scans and to add
color to a scan.
Section 11describes how to create 3D models and Section 12 how to edit those models.
SceneVision Reference Guide
Section 13 is a reference to all of the functions found in SceneVision-3D, organized by menu.
This is often the easiest place to locate information about a particular function.
Troubleshooting
Section 14 provides troubleshooting information.
Appendix
The Appendix, Section 15, includes technical information for programmers, as well as some
useful details about the system configuration.
DeltaSphere-3000 3D Scene Digitizer
4
9/23/05
