3rdTech DeltaSphere-3000 User Manual Download Page 13 | Manualshive

Page: 13 / 126

background image

2.3

Installing DeltaSphere Software

SceneVision-3D

is the DeltaSphere’s software application. It serves many functions.

It is the interface to the DeltaSphere-3000 during the scanning process and provides

communication with the server software (pre-installed and running on the DeltaSphere-3000

scanner), device control, and data acquisition and display. With the color option, it also provides

camera control and image acquisition.

After scanning,

SceneVision-3D

provides functions for viewing, processing, analyzing and

presenting data captured with the DeltaSphere-3000.

Minimum PC Configuration for DeltaSphere Software

Windows XP or 2000

400 MHz Pentium III

256MB of memory (512MB or 1GB recommended)

100 megabit Ethernet (or 10/100)

10-20 gigabytes of free disk space (40-60GB recommended).

A 3-button mouse (or 2 buttons and a scroll wheel)

Note: For the best performance, and for ease of use of SceneVision software, a
high-performance 3D graphics card is highly recommended. This does NOT
have any effect on the performance of the DeltaSphere scanner – only on the data
display in SceneVision. Cards like this are now inexpensive and readily available
for both desktop and laptop PCs. Viewing 3D models, in particular, can be very
slow without one of these cards. Contact 3rdTech for specific recommendations.

2.3.1

Installation Procedure

SceneVision software is installed from the DeltaSphere software CD. Instructions for this

installation follow:

Note: You must have administrator privileges to install SceneVision.

1.

With your PC running, put the installation CD in your CD drive. In most computers the
program will begin to run automatically. If it doesn’t, use Windows Explorer to browse to
your CD drive. In

My Computer

it is usually ‘D:’ and it may say ‘DeltaSphere3.1 (D:)’.

Double-click on

Setup.exe

to run the installation program.

2.

Choose

Next

in the first dialog.

3.

Read the license agreement and click ‘Yes’ if you agree to the terms.

4.

For the

Destination Location

, choose the default directory

C:\Program Files\DeltaSphere

if

you have enough space – approximately 30MB. (You can change this, but we recommend
accepting the default.)

5.

For the

Data Directory

, we recommend accepting the default

C:\DeltaSphere\data

if you

have enough space – approximately 250MB

.

However, if your system has more than one

hard drive you may want to put the data directory on the drive with the most disk space
available. For example, you might change it to

E:\DeltaSphere\data

.

DeltaSphere-3000 3D Scene Digitizer

12

9/23/05

«
...
11
12
13
14
15
...
»

Summary of Contents for DeltaSphere-3000































































































































Reviews:

No comments

Related manuals for DeltaSphere-3000

Brand: Samsung Pages: 149

Brand: Oki Pages: 2

Brand: Camcar Pages: 6

Action Replay DSi

Brand: Datel Pages: 2

Brand: Farenheit Pages: 8

Brand: Napoleon Pages: 4

Brand: Oki Pages: 18

Brand: Empire Comfort Systems Pages: 4

1306 RAPID SYSTEM

Brand: Thule Pages: 8

Brand: Woody Valley Pages: 15

Brand: Blue Ox Pages: 7

Brand: Shad Pages: 3

Brand: Dakota Digital Pages: 6

Brand: Omron Pages: 25

Brand: HHD Pages: 5

Brand: Phonocar Pages: 6

Brand: Zamel Pages: 20

Brand: Iget Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands