4.3.5
Additional Scans
If you are not using the DeltaSphere color option, this scan is complete. (Scanning with the
color option is described in section 6.) Often you will need to do additional scans from different
locations but in the same scene. This typically involves moving the DeltaSphere and tripod to a
new location. Then, if the scene is still open, set the scan parameters once again and hit Start.
You will be prompted for a new scan name which will be created in the same scene directory
but in its own subfolder.
Figure 22 SceneVision with Scan Data
DeltaSphere-3000 3D Scene Digitizer
31
9/23/05
