3rdTech DeltaSphere-3000 User Manual Download Page 105

Page: 105 / 126

Bookmarks

Bookmarks are user-defined viewpoints of a model.

Create Bookmark

Creates a bookmark from the current viewpoint. Prompts for a
name.

Previous Bookmark

Moves the viewpoint to the next bookmark in the list. The time
to move is specified in Preferences.

Next Bookmark

Moves the viewpoint to the previous bookmark in the list. The
time to move is specified in Preferences.

Bookmark Loop

Changes the viewpoint, in a continuous loop, through each
bookmark. This function is only enabled if at least two
bookmarks are defined.

Animate

Provides 2 preset animations – Rock, which rocks the model
back and forth, and Rotate, which makes the model rotate about
its center point. Reset Rotation brings it back to its starting
point.

Move Object

Specifies that mouse controls move the model.

Fly (Move Eye)

Specifies that mouse controls moves the viewpoint.

Fix Viewpoint

Locks the viewpoint to the current position, enabling only
rotation about that point.

Keep Ground Level

When enabled, this helps keep the model level during
interactive viewing.

Perspective View

Enables a perspective view where objects farther from the
viewpoint appear smaller.

Orthographic View

Enables an orthographic view where objects farther from the
viewpoint do not appear smaller.

Millions of Texture Colors (32-bit)

Loads the textures into the graphics card in 32-bit. This

is recommended if your graphics card has enough video
memory to store the textures.

Thousands of Texture Colors (16-bit)

Loads the textures into the graphics card in 16-

bit. This can significantly improve interactive performance of
models when the textures do not fit into video memory.

Change Background Color

Opens a window with which to choose a background color.

Tool Windows

Get File Info

Displays information about the active window.

Get Annotation Properties

Opens the Annotation Properties window for the selected

annotation.

Open Hyperlinked Document

Opens a document or web page that has been linked to

the annotation.

Show Messages

Displays the program’s message file.

Hide Messages

Hides the program’s message file.

View Change Log

Displays the log of all saved edits made to any of the files in
the scene.

Scene Tree Visible

Displays or hides the Scene Tree.

Toolbar Visible

Displays or hides the toolbar.

DeltaSphere-3000 3D Scene Digitizer

104

9/23/05

Summary of Contents for DeltaSphere-3000






























































































































Search results

Summary of Contents for DeltaSphere-3000

Reviews:

Related manuals for DeltaSphere-3000

Brands by name

Popular brands

3rdTech DeltaSphere-3000, User Manual

Search results

Summary of Contents for DeltaSphere-3000

Reviews:

Related manuals for DeltaSphere-3000

Brands by name

Popular brands