3rdTech DeltaSphere-3000 User Manual Download Page 14 | Manualshive

Page: 14 / 126

background image

6.

For the

Program Folder

, accept the default

DeltaSphere

.

7.

The installer will now copy files and set up icons. When complete, the Start Menu
DeltaSphere folder will open. Click

Finish

to end the installation procedure (you may need to

move or close the DeltaSphere folder to see the

Finish

button).

SceneVision License

The SceneVision-3D license locks the software to a particular PC. Completing the software

installation requires contacting 3rdTech for a license key particular to your computer. To do

this:

1.

Run SceneVision-3D once (by double-clicking on the desktop icon or selecting SceneVision-
3D from the DeltaSphere folder in the Start menu) to get the registration information you’ll
need to send to 3rdTech.

2.

Follow the instructions displayed after you run the program. It will show a machine serial
number which you should email to 3rdTech. 3rdTech will use this number to send you a file
that will unlock the SceneVision program.

Note: You can run SceneVision up to 10 times before receiving this license file.
After installing the file you can run the program indefinitely on that PC.

Note: You must run the program at least one time with administrator privileges
after installing the license before those without administrator privileges can use
the program.

The

DeltaSphere-3000 User Manual

(this document) is in the file

Delta_Manual_v3.0a.pdf

. To

open the file, either go to the Start menu and select Programs -> DeltaSphere -> DeltaSphere-

3000 User Manual or run SceneVision-3D and select

Help

from the program’s

Help

menu.

Display Setting

SceneVision-3D requires running your display in 24-bit or 32-bit mode.

SceneVision will not

run without one of these settings!

To check your display settings:

•

Go to your Windows

Start

menu (usually in the bottom left-hand corner of your

screen).

•

Click on

Start

, then

Settings

, and then

Control Panel

. (On some systems there is no

Settings selection – the Control Panel is visible in the Start menu.) One of the items
in this window will be

Display

.

•

Double click on Display and a window will appear.

•

Select the

Settings

tab near the top of the window.

•

Under

Color quality

,

Colors

or

Color

Palette

(depends on your version of Windows)

you must have either 24 bit or 32 bit selected. (It also might say

True Color

,

Highest

,

or it might have the number of colors which must be at least 16,000,000.) If you do
not have one of these options your system’s graphics are insufficient for
SceneVision. If one of these settings is available and you change the display by
making the selection, select OK and the system will test the new configuration. If
there is any problem you will have the option of switching back to the previous
setting.

DeltaSphere-3000 3D Scene Digitizer

13

9/23/05

«
...
12
13
14
15
16
...
»

Summary of Contents for DeltaSphere-3000































































































































Reviews:

No comments

Related manuals for DeltaSphere-3000

Brand: AAMP of America Pages: 6

Micropulse BTL5 Series

Brand: Balluff Pages: 16

Brand: Garmin Pages: 22

Brand: Manfrotto Pages: 2

Brand: Manfrotto Pages: 2

Brand: Mammut Pages: 32

Brand: Mamiya Pages: 10

Brand: MAM Pages: 4

Brand: NA-DE Pages: 2

Brand: N-Com Pages: 2

Brand: N-Com Pages: 64

Brand: Xerox Pages: 2

Brand: Valor Pages: 5

Brand: Taffio Pages: 8

Brand: Empire Comfort Systems Pages: 4

Brand: DAVIS Pages: 32

Zerolite Wheelset

Brand: Vuelta Pages: 12

Brand: BASETech Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands