manualshive.com logo in svg

YOKOGAWA AQ7280 OTDR, Руководство пользователя

YOKOGAWA AQ7280 OTDR - высокоточный оптический тестер с возможностью измерения длины волоконных линий и нахождения точек поломки. Получите Руководство по началу работы бесплатно на manualshive.com, чтобы ознакомиться с возможностями этого инструмента. Легко загружайте руководства по эксплуатации и начинайте использовать свой устройство.

Поделиться
Скачать
background image

1-4

IM AQ7280-01EN

Light Source Feature

•  Stabilized Light Source (/SLS option)

  This is used as a light source for measuring optical loss or as a light source for optical fiber 

identification. The measurement light (CW, CHOP) is emitted from the OTDR port of the OTDR 
unit.

*

 The wavelength of the measurement light is the same as that of the optical pulse of the 

relevant OTDR unit.
*  AQ7282M is supported on firmware version 2.01 and later.

•  Visible Light Source (VLS module, OPM module with a VLS function)

  This is used to view the fault locations or check the cores of multi-core optical fiber cables. A 650 

nm visible light (CW, CHOP (2 Hz)) is emitted from the optical output port of the VLS module or 
that of the OPM module with a visible light source.

Optical Power Meter Feature

•  Optical Power Meter (OPM module)

  This is used as an optical power meter for measuring optical loss or for measuring the power of 

communication light. It measures the power of the light entering the optical input port of the OPM 
module. By logging and graphing the fluctuation in the optical power value, you can view the 
fluctuation in the optical power and loss.

•  Power Checker (/PC option)

  The OTDR port

*

 of the OTDR unit (except AQ7282M) is equipped with an optical power checker 

feature (/PC option) that enables you to check the presence of communication light (fiber in use) 
within the optical fiber cable under measurement and view its power value.
*  Not applicable to the port 2 of AQ7283E and AQ7283F.

USB Feature

•  USB Storage Medium Connection (Type A)

  USB storage media complying with USB1.0/1.1/2.0 can be used. Up to two media can be 

connected.

  You can save waveform data and measurement conditions to them.

•  Fiber Inspection Probe Connection (Type A)

  A fiber inspection probe specified by Yokogawa can be used to view stains on the optical fiber 

cable end face on the AQ7280 screen. To use this feature, start Fiber Inspection Probe from the 
top menu. The fiber inspection probe is not included with the AQ7280. Please purchase your own 
fiber inspection probe. For information about compatible fiber inspection probes, contact your 
nearest YOKOGAWA dealer.

•  PC Connection (Type B mini)

  You can connect a PC to the AQ7280 and control it using communication commands. For details, 

see the communication interface user’s manual, IM AQ7280-17EN.

ETHERNET Feature (/LAN option)

You can connect a PC to the AQ7280 and control it using communication commands. For details, see 
the communication interface user’s manual, IM AQ7280-17EN.

SD Card

You can use SD cards. Only one SD card can be inserted at any given time. You can save waveform 
data and measurement conditions to them. SD cards are not included with the AQ7280. Please use 
your own SD cards. For information about compatible SD cards, contact your nearest YOKOGAWA 
dealer.

1.1  Overview

Содержание AQ7280 OTDR




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AQ7280 OTDR

Camille Bauer SIRAX MM1200 Safety Instructions preview
SIRAX MM1200
Бренд: Camille Bauer Страницы: 12
Sanmenxia ZX400 Operation Manual preview
ZX400
Бренд: Sanmenxia Страницы: 17
SANKO SM-1100 Instruction Manual preview
SM-1100
Бренд: SANKO Страницы: 25
Samson 2162 Parts And Technical Service Manual preview
2162
Бренд: Samson Страницы: 2
Percussion Play Babel Drum Installation Instructions Manual preview
Babel Drum
Бренд: Percussion Play Страницы: 3
Polimaster PM1703MO-1 Operation Manual preview
PM1703MO-1
Бренд: Polimaster Страницы: 6
STONEX R2W 2 PLUS 500 Instruction Manual preview
R2W 2 PLUS 500
Бренд: STONEX Страницы: 99
Avery Weigh-Tronix QTLTSC Service Manual preview
QTLTSC
Бренд: Avery Weigh-Tronix Страницы: 54
PCB Piezotronics IMI Sensors Spindler 607A61 Installation And Operating Manual preview
IMI Sensors Spindler 607A61
Бренд: PCB Piezotronics Страницы: 24
ACL Staticide ACL 300B Operation Manual preview
ACL 300B
Бренд: ACL Staticide Страницы: 5
Wacom SD-310E User Manual preview
SD-310E
Бренд: Wacom Страницы: 23
Xylem WTW SensoLyt 900 Operating Manual preview
WTW SensoLyt 900
Бренд: Xylem Страницы: 12
J-TECH Solar Auxiliary Power Unit Operator'S Manual preview
Solar Auxiliary Power Unit
Бренд: J-TECH Страницы: 6
Lumel NA3 User Manual & Quick Start preview
NA3
Бренд: Lumel Страницы: 32
Fluke FI-500 FiberInspector Micro Quick Start Manual preview
FI-500 FiberInspector Micro
Бренд: Fluke Страницы: 2
ICON truflo TC Series Operating Manual preview
truflo TC Series
Бренд: ICON Страницы: 6
RBR quartz3 BPR zero Manual preview
quartz3 BPR zero
Бренд: RBR Страницы: 22
Vaisala WAV252 Quick Reference Manual preview
WAV252
Бренд: Vaisala Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды