YOKOGAWA AQ7280 OTDR Скачать руководство пользователя страница 138

Страница: 138 / 195

6-7

IM AQ7280-01EN

File Operation and Printing

Index

• Multi-Core Fiber Measurement

Display

Description

—

Waveform data from measuring multi-core fiber (including the measurement conditions)

is saved in an SOR file format that conforms to Telcordia SR-4731. When Action is set

to Save or Load, file type cannot be changed. Moreover, SOR files do not appear in the

file list.

—

Screen image data of the fiber inspection probe is saved to a file in BMP format. When

Action is set to Save or Load, file type cannot be changed. Moreover, BMP files do not

appear in the file list.

*.MPZ

SOR files, MPJ files, and BMP files are compressed and saved to MPZ files. They can

be used as storage files. For the decompression procedure, see “Note” under “Saving

the Project” in section 2.8.

*.TXT

Multi-core fiber measurement conditions, waveform data summary information, and

optical power measurements are saved to a tab separated file (firmware version 1.07

and later).

• Schedule Measurement

Display

Description

—

Waveform data measured according to the specified schedule (including the

measurement conditions) is saved in an SOR file format that conforms to Telcordia SR-

4731. When Action is set to Save or Load, file type cannot be changed. Moreover, SOR

files do not appear in the file list.

*.CSV

Schedule information and measured optical power values (including measurement

conditions) are saved to a file in CSV format.

• OTDR Smart Mapper

Display

Description

*.SOR

Waveform data measured from an optical pulse (including the measurement conditions)

is saved in an SOR file format that conforms to Telcordia SR-4731.

*.BMP

Screen image data is saved to a file in BMP format.

*.JPG

Screen image data is saved to a file in JPG format.

*.SOR|*.BMP

Both SOR and BMP files are saved.

*.SOR|*.JPG

Both SOR and JPG files are saved.

.CSV (waveform) Waveform data measured from an optical pulse is saved to a file in CSV format.
.CSV (event)

Event data is saved to a file in CSV format.

*.SMP

Adapt Trace data measured from an optical pulse (including the measurement

conditions) is saved to a file in SMP format.

The screen image immediately before entering the file operation screen is saved.

• Power Meter

Display

Description

*.CSV

Measured optical power values (including measurement conditions) are saved to a file

in CSV format.

• Fiber Inspection Probe

Display

Description

*.BMP

Screen image data is saved to a file in BMP format.

*.JPG

Screen image data is saved to a file in JPG format.

Loading

The following types of files can be loaded.

• Top Screen

Display

Description

*.CFG

System settings are loaded.

• OTDR feature

Display

Description

*.SOR

Optical pulse waveform (including measurement conditions) in SOR format that

conforms to Telcordia SR-4731 is loaded.

*.SET

Measurement conditions are loaded.

6.3 Saving and Loading Data

Содержание AQ7280 OTDR




































































































































































































Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды

YOKOGAWA AQ7280 OTDR, Руководство пользователя

Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды