manualshive.com logo in svg

YOKOGAWA AQ7280 OTDR, Руководство пользователя

YOKOGAWA AQ7280 OTDR - высокоточный оптический тестер с возможностью измерения длины волоконных линий и нахождения точек поломки. Получите Руководство по началу работы бесплатно на manualshive.com, чтобы ознакомиться с возможностями этого инструмента. Легко загружайте руководства по эксплуатации и начинайте использовать свой устройство.

Поделиться
Скачать
background image

1-7

IM AQ7280-01EN

Features

1

2

3

4

5

6

7

8

Index

Optical Pulse Measurement of Multi-core Optical Fiber Cables

Multi-core fiber measurement takes time and effort. This feature makes it possible to efficiently 
measure multi-core optical fiber cables through a dedicated menu.

Projects

  Items required to make multi-core optical fiber cable measurements such as measurement 

conditions, analysis conditions, and core information are managed as projects.

  By creating a project before a measurement, you can measure cores under the same conditions.
  You can save projects to files. You can load a previously saved project and make measurements 

under the same conditions.

List

  Cores are listed. You can easily distinguish between cores that have been measured, cores 

that have not been measured, and cores that do not to be measured. This list prevents you 
from forgetting measurements and from making unnecessary measurements. (You can make 
measurements efficiently.)

Saving Measured Results

  Measurement results of each core are automatically saved to a folder that is automatically created 

in the folder that the project file is saved in. The folder will have the same name as the project file.

Optical Fiber Cable Monitoring (/MNT option)

This feature performs optical pulse measurement at regular intervals so that you can monitor for errors 
in the optical fiber cable. Results measured at regular intervals are saved to memory in CSV or SOR 
format (waveform data). Data and folders saved in memory are automatically assigned names with 
timestamps. During monitoring (while schedule measurement is in progress), measurement items, 
such as the loss between two points, of the logged optical pulses are shown on the AQ7280 screen. 
Because the changes in the measurement items, such as the loss between two points, can be seen 
on the time axis, if an interruption occurs in the optical pulse input, you can determine when the optical 
power level fell on the AQ7280 screen. After determining the time, you can view the measured results 
in the file with the corresponding timestamp. Up to four measurement items can be monitored.

1.2  Optical Pulse Measurement

Содержание AQ7280 OTDR




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AQ7280 OTDR

Parker Research Corp 200 Series Operating Instructions preview
200 Series
Бренд: Parker Research Corp Страницы: 3
Yamaha 141 Quick Operation Manual preview
141
Бренд: Yamaha Страницы: 2
Callaway 350TL Manual preview
350TL
Бренд: Callaway Страницы: 13
Hach TitraLab User Manual preview
TitraLab
Бренд: Hach Страницы: 38
Hach sension ph31 Manual preview
sension ph31
Бренд: Hach Страницы: 28
Hach FH950 User Manual preview
FH950
Бренд: Hach Страницы: 40
Hach POCKET COLORIMETER II Basic User Manual preview
POCKET COLORIMETER II
Бренд: Hach Страницы: 142
Hach DR/2010 Instruction Sheet preview
DR/2010
Бренд: Hach Страницы: 4
Hach Lange 2100AN Basic User Manual preview
Lange 2100AN
Бренд: Hach Страницы: 308
Hach ANATEL PAT700 Operator'S Manual preview
ANATEL PAT700
Бренд: Hach Страницы: 158
Hach AMTAX sc User Manual preview
AMTAX sc
Бренд: Hach Страницы: 118
Hach POCKET COLORIMETER II Instruction Manuals preview
POCKET COLORIMETER II
Бренд: Hach Страницы: 116
Hach 5500sc Maintenance And Troubleshooting Manual preview
5500sc
Бренд: Hach Страницы: 132
Hach DR 6000 Instruction Manual preview
DR 6000
Бренд: Hach Страницы: 8
Hach HQ1110 User Manual preview
HQ1110
Бренд: Hach Страницы: 38
Hach NA5600 sc Na+ Operation Manual preview
NA5600 sc Na+
Бренд: Hach Страницы: 200
KROHNE AF-E 400 Quick Start Manual preview
AF-E 400
Бренд: KROHNE Страницы: 34
CA.MI T-PLUS User Manual preview
T-PLUS
Бренд: CA.MI Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды