YOKOGAWA AQ7280 OTDR Скачать руководство пользователя страница 90

Страница: 90 / 195

3-9

IM AQ7280-01EN

Optical Pulse W

aveform Display

Index

Calculation Method for Total Loss

• Cumul-Loss (Cumulate Loss)

The integrated value of the splice losses at each event from the measurement reference point (S)

is displayed. This is the conventional calculation method (firmware version 1.02 and earlier).

Splice loss of each event

• Loss between S and E

The loss (TPA approximation method) between the measurement reference point (S) and the

end of fiber (E) is displayed.

Splice loss

between

two points

Measurement reference point (S)

Note

If Loss between S and E is selected, markers

and

are placed automatically at the measurement

reference point (S) and the END point (E) when event analysis is executed.

Calculation Method for Total Return Loss

Select whether to include the return loss value at the end of fiber (E) in the total return loss.

Include END: The value is included in the total return loss.
Exclude END: The value is not included in the total return loss.

▲

EEEE

Measurement reference point

Event number 1

Event number 2

END point

3.2 Configuring the Waveform Display

Содержание AQ7280 OTDR




































































































































































































Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

YOKOGAWA AQ7280 OTDR, Руководство пользователя, Страница: 90 / 195

Результаты поиска

Содержание AQ7280 OTDR

Отзывы: