YOKOGAWA AQ7280 OTDR Скачать руководство пользователя страница 176

Страница: 176 / 195

8-4

IM AQ7280-01EN

Code

Message

648

Can not make file or folder in this folder. (Max 550 files/folder)

690

Cannot save the measurement data. Please confirm the following. - Media is correctly installed. - Media is

formatted. - Media is not read-only.

692

Media is full. Please install new media.

693

Cannot make a folder. Please change the folder name.

694

Cannot open the file. Please confirm the following. - Media is correctly inserted. - Media is not changed.

695

One or more conditions in this file cannot be restored. The instrument automatically determines those conditions.

696

Folder cannot be deleted. Please confirm the following. -There is no file or folder in this folder.

697

Folder can't be copied. The destination folder is a subfolder of the source folder.

698

Folder can not be copied. Please confirm the following. -There is no file or folder in this folder. - Media is correctly

inserted. - Media is formatted. - Media is not read-only.

700

Failed to open the file.

701

Failed to close the file.

702

Failed to read the file.

703

Irregular file format.

704

Failed to write the file.

705

Cannot be saved. No trace data.

706

Cannot be saved. No event data.

707

One or more measurement conditions are not specified. Please confirm the measurement conditions.

708

Cannot be saved. This data is not taken with this instrument.

709

File cannot be retrieved. Distance range exceeds 400 km.

710

File cannot be retrieved. Invalid wavelength

711

File cannot be retrieved. Invalid distance range

712

File cannot be retrieved. Invalid pulse width

713

File cannot be retrieved. Invalid sampling points

714

File cannot be retrieved. Distance range exceeds 400 km.

715

File cannot be retrieved. Sampling intervals exceed 64m.

716

File cannot be retrieved. Actual averaging times or duration is not set.

717

Duplicate file name

718

File is damaged. Check the file.

719

File name too long. Maximum length is 36 letters.

720

File is now being accessed. Execute after access is released.

721

Cannot load this file. Invalid file format or this firmware version is old.

722

Recall Setup File cannot load the measurement condition which sampling interval has been changed to shorter

than the standard sampling interval at Meas. Range Change function.

723

This file cannot be supported by the firmware with this product. Please update into the latest firmware to read this

file.

724

The model name of the instrument and model name in the file is different. This file cannot be read with this

instrument.

725

Can't use the following characters. \ / : ; * ? " < > | % . ,

726

This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition

that cannot be measured with this instrument.

727

This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition

that cannot be measured with this instrument. - Distance Range

728

This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition

that cannot be measured with this instrument. - Pulse Width

729

Project file load failed. Create new project file

730

This project file has individual settings. Conditions cannot be changed using SETUP. Please create new project file

to change setting. Select "Revise project name" to create new file.

731

Checked SOR file does not exist. Please check the SOR files in the folder.

752

Print Error. Printer cannot be found.

754

USB printer error Perform the power cycle.

755

USB printer is offline.

756

No paper (USB printer)

757

USB printer cannot be found. Perform the power cycle.

758

The printer is out of order, and needs to be repaired. Please contact Yokogawa's representatives.

759

Event list cannot be printed because event analysis is not performed.

760

Cannot execute it while printing.

761

This operation is not executed while light is emitting. Stop emitting the light then execute the operation.

800

This function is not supported.

801

FTP Error : Pwd Please confirm network connection and setting.

802

FTP Error : Cwd Please confirm network connection and setting.

8.2 Error Messages

Содержание AQ7280 OTDR




































































































































































































Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды

YOKOGAWA AQ7280 OTDR, Руководство пользователя

Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды