YOKOGAWA AQ7280 OTDR Скачать руководство пользователя страница 139

Страница: 139 / 195

6-8

IM AQ7280-01EN

• Multi-Core Fiber Measurement

Display

Description

*.MPJ

A summary screen image data of the multi-core fiber measurement conditions,

waveform data summary information, optical power measurement values, and fiber

inspection probe is loaded. To load the file, the file and folder configuration of the SOR

file measured with the multi-core fiber measurement feature must be the same as when

the file was saved.

• Schedule Measurement

Display

Description

*.CSV

Schedule information and measured optical power values (including measurement

conditions) are loaded. To load the file, the file and folder configuration of the SOR file

measured with the schedule measurement feature must be the same as when the file

was saved.

• OTDR Smart Mapper

Display

Description

*.SOR

Optical pulse waveform (including measurement conditions) in SOR format that

conforms to Telcordia SR-4731 is loaded.

*.SMP

Adapt Trace data measured from an optical pulse (including the measurement

conditions) is loaded.

Save Destination Drive

Select the destination drive from the following.

Display

Description

Int. Memory

AQ7280 internal memory

SD Card

SD card (external memory) inserted into the AQ7280

USB Memory 1

The first USB storage medium connected to a type A USB port of the AQ7280

USB Memory 2

The second USB storage medium connected to a type A USB port of the AQ7280

Note

• Do not save files directly to the root folder. Create a folder, and save files to that folder. If there are many

folders in the root folder, it will take some time to access files to a folder that is at a lower level in the
folder hierarchy.

• The number of folders and files that can be saved in the root folder is 50. If this limit is exceeded, an error

message will be displayed when saving files.

• If more than 250 files and folders are saved in a single folder, a warning message will be displayed.

Saving is possible, but file operations will slow down.

6.3 Saving and Loading Data

Содержание AQ7280 OTDR




































































































































































































Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды

YOKOGAWA AQ7280 OTDR, Руководство пользователя

Результаты поиска

Содержание AQ7280 OTDR

Отзывы:

Похожие инструкции для AQ7280 OTDR

Бренды по названию

Популярные бренды